FREE: Iron On Transfer " LOVE TO GRANDPA (country scene) "

INSTRUCTIONS FOR HAND IRONING THE IMAGE
1) Trim away any un-printed paper around your image that you do
not want to Transfer.
2) Preheat the iron on its highest temperature setting for at least
8 minutes. The iron must be very hot! Do not use steam.
3) Place the image to be transferred face down on the garment in
the desired position.
Place a sheet of paper between layers of the garment.
Place a sheet of paper over the transfer.
4) The image now needs to be 'set' on the fabric (so that it does not
move while being transferred). To do this, press the iron firmly
over the transfer for 15-20 seconds in several areas, making sure
to cover the entire transfer in this process. It is important that you press
straight down for this step and lift up the iron completely when repositioning to
do another area.

INSTRUCTIONS FOR MUGS:
To transfer onto a ceramic mug you need a mug heat press or you can get a plastic mug that you can insert photos or items into at your favorite craft supply store and transfer to a piece of fabric and insert into the mug.

COMMERCIAL HEAT PRESS INSTRUCTIONS:
Preheat the heat press to 325° Fahrenheit. To remove any moisture from the fabric, press for a few seconds and allow cooling. This aids in better adhesion of the image to the fabric. Place the transfer face down in the desired position and press using light to medium pressure for 10 seconds. Gently rub the transfer for a couple of seconds with a soft cloth and peel the transfer backing.

WASHING INSTRUCTIONS:
o Always turn your garment inside out. This will minimize the amount of abrasion that the transfer will encounter with other garments in the wash.
o Wash the garment in cold water using a mild detergent. DO NOT USE BLEACH.
o Remove the garment from the wash immediately and allow to air dry. If you are going to tumble dry, use the air only setting. By doing this over the life of the garment, you will be ensuring that your image stays clear and bright.