The listing, HANA MODZ DNA 20 Mod (Carbon Fiber) has ended.
Includes: DNA 20 Mod, Micro-USB Charger, and 510 to Ego thread adapter.
- 510 threaded connector
- Variable Wattage from 7W-20W in .1 watt increment
- Body is aluminum
- OLED display shows battery charge state, volts and ohms
- Houses 1 18650 battery
- MicroUSB charging port
- Compatible with 1.0ohm~3.0ohm atomizers
- Locked mode: Pressing the fire button five times with less than .7 seconds between presses will cause the device to enter "Locked mode". In Locked mode, the device will not fire and the output power will not adjust accidentally. While in Locked mode, the screen will be off, except that pressing a button will show “Locked, click 5X”. To exit Locked, press the fire button 5 times
- Stealth mode: While locked, pressing the fire and down buttons simultaneously for five seconds will switch to stealth mode. In this mode the display is off. It will still show error messages and the “Locked, Click 5X” advisory. To switch back to normal display mode, from locked mode hold down the fire and down buttons simultaneously for 5 seconds. This setting is stored to internal flash memory, and remains if power is removed
- Right Mode & Left Mode: While locked, holding the fire and up buttons simultaneously for 5 seconds flips the display. This setting is stored to internal flash memory, and remains if power is removed
- The DNA 20 will indicate a variety of error states
- Check Atomizer: The DNA does not detect an atomizer, or the atomizer has shorted out
- Shorted: The atomizer or wiring are short circuited
- Check Battery: The battery is below 3.1 volts. It probably needs to be charged
- Weak Battery: The battery sags excessively when firing. This typically means the user is not using a high rate battery, or the battery is old and degraded. It can also mean the battery is not making good contact
- The DNA 20D has onboard temperature sensing. It will shut down and display this message if the internal board temperature becomes excessive
AND MORE!